This is a follow-up on https://old.reddit.com/Bitcoin/comments/hqzp14/technical_the_path_to_taproot_activation/
Taproot! Everybody wants it!! But... you might ask yourself: sure, everybody else
wants it, but why would I
, sovereign Bitcoin HODLer, want it? Surely I can be better than everybody else
because I swapped XXX fiat for Bitcoin unlike all those nocoiners?
And it is important for you to know the reasons why you, o sovereign Bitcoiner, would want Taproot activated. After all, your nodes (or the nodes your wallets use, which if you are SPV, you hopefully can pester to your wallet vendoimplementor about) need to be upgraded in order for Taproot activation to actually succeed instead of becoming a hot sticky mess.
First, let's consider some principles of Bitcoin.
- You the HODLer should be the one who controls where your money goes. Your keys, your coins.
- You the HODLer should be able to coordinate and make contracts with other people regarding your funds.
- You the HODLer should be able to do the above without anyone watching over your shoulder and judging you.
I'm sure most of us here would agree that the above are very important principles of Bitcoin and that these are principles we would not be willing to remove. If anything, we would want those principles strengthened (especially the last one, financial privacy, which current Bitcoin is only sporadically strong with: you can
get privacy, it just requires effort to do so).
So, how does Taproot affect those principles?
Taproot and Your /Coins
Most HODLers probably HODL their coins in singlesig addresses. Sadly, switching to Taproot would do very little for you (it gives a mild discount at spend time, at the cost of a mild increase in fee at receive time (paid by whoever sends to you, so if it's a self-send from a P2PKH or bech32 address, you pay for this); mostly a wash).
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash, so the Taproot output spends 12 bytes more; spending from a P2WPKH requires revealing a 32-byte public key later, which is not needed with Taproot, and Taproot signatures are about 9 bytes smaller than P2WPKH signatures, but the 32 bytes plus 9 bytes is divided by 4 because of the witness discount, so it saves about 11 bytes; mostly a wash, it increases blockweight by about 1 virtual byte, 4 weight for each Taproot-output-input, compared to P2WPKH-output-input).
However, as your HODLings grow in value, you might start wondering if multisignature k-of-n setups might be better for the security of your savings. And it is in multisignature that Taproot starts to give benefits!
Taproot switches to using Schnorr signing scheme. Schnorr makes key aggregation -- constructing a single
public key from multiple public keys -- almost as trivial as adding numbers together. "Almost" because it involves some fairly advanced math instead of simple boring number adding, but hey when was the last time you added up your grocery list prices by hand huh?
With current P2SH and P2WSH multisignature schemes, if you have a 2-of-3 setup, then to spend, you need to provide two different signatures from two different public keys. With Taproot, you can create, using special moon math, a single public key that represents your 2-of-3 setup. Then you just put two of your devices together, have them communicate to each other (this can be done airgapped, in theory, by sending QR codes: the software to do this is not even being built yet, but that's because Taproot hasn't activated yet!), and they will make a single
signature to authorize any spend from your 2-of-3 address. That's 73 witness bytes -- 18.25 virtual bytes -- of signatures you save!
And if you decide that your current setup with 1-of-1 P2PKH / P2WPKH addresses is just fine as-is: well, that's the whole point of a soft
fork: backwards-compatibility; you can receive from Taproot users just fine, and once your wallet is updated for Taproot-sending support, you can send to Taproot users just fine as well!
(P2WPKH and P2WSH -- SegWit v0 -- addresses start with bc1q; Taproot -- SegWit v1 --- addresses start with bc1p, in case you wanted to know the difference; in bech32 q is 0, p is 1)
Now how about HODLers who keep all, or some, of their coins on custodial services? Well, any custodial service worth its salt would be doing at least
2-of-3, or probably something even bigger, like 11-of-15. So your custodial service, if it switched to using Taproot internally, could save a lot more (imagine an 11-of-15 getting reduced from 11 signatures to just 1!), which --- we can only hope! --- should translate to lower fees and better customer service from your custodial service!
So I think we can say, very accurately, that the Bitcoin principle --- that YOU are in control of your money --- can only be helped by Taproot (if you are doing multisignature), and, because P2PKH and P2WPKH remain validly-usable addresses in a Taproot future, will not be harmed by Taproot. Its benefit to this principle might be small (it mostly only benefits multisignature users) but since it has no drawbacks with this (i.e. singlesig users can continue to use P2WPKH and P2PKH still) this is still a nice, tidy win!
(even singlesig users get a minor benefit, in that multisig users will now reduce their blockchain space footprint, so that fees can be kept low for everybody; so for example even if you have your single set of private keys engraved on titanium plates sealed in an airtight box stored in a safe buried in a desert protected by angry nomads riding giant sandworms because you're the frickin' Kwisatz Haderach, you still gain some benefit from Taproot)
And here's the important part: if P2PKH/P2WPKH is working perfectly fine with you and you decide to never use Taproot yourself, Taproot will not affect you detrimentally
. First do no harm!
Taproot and Your Contracts
No one is an island, no one lives alone. Give and you shall receive. You know: by trading with other people, you can gain expertise in some obscure little necessity of the world (and greatly increase your productivity in that little field), and then trade the products of your expertise for necessities other people have created, all of you thereby gaining gains from trade.
So, contracts, which are basically enforceable agreements that facilitate trading with people who you do not personally know and therefore might not trust.
Let's start with a simple example. You want to buy some gewgaws from somebody. But you don't know them personally. The seller wants the money, you want their gewgaws, but because of the lack of trust (you don't know them!! what if they're scammers??) neither of you can benefit from gains from trade.
However, suppose both of you know of some entity that both of you trust. That entity can act as a trusted escrow. The entity provides you security: this enables the trade, allowing both of you to get gains from trade.
In Bitcoin-land, this can be implemented as a 2-of-3 multisignature. The three signatories in the multisgnature would be you, the gewgaw seller, and the escrow. You put the payment for the gewgaws into this 2-of-3 multisignature address.
Now, suppose it turns out neither of you are scammers (whaaaat!). You receive the gewgaws just fine and you're willing to pay up for them. Then you and the gewgaw seller just sign a transaction --- you and the gewgaw seller are 2, sufficient to trigger the 2-of-3 --- that spends from the 2-of-3 address to a singlesig the gewgaw seller wants (or whatever address the gewgaw seller wants).
But suppose some problem arises. The seller gave you gawgews instead of gewgaws. Or you decided to keep the gewgaws but not sign the transaction to release the funds to the seller. In either case, the escrow is notified, and if it can sign with you to refund the funds back to you (if the seller was a scammer) or it can sign with the seller to forward the funds to the seller (if you were a scammer).
Taproot helps with this: like mentioned above, it allows multisignature setups to produce only one signature, reducing blockchain space usage, and thus making contracts --- which require multiple people, by definition, you don't make contracts with yourself --- is made cheaper (which we hope enables
more of these setups to happen for more gains from trade for everyone, also, moon and lambos).
(technology-wise, it's easier to make an n-of-n than a k-of-n, making a k-of-n would require a complex setup involving a long ritual with many communication rounds between the n participants, but an n-of-n can be done trivially with some moon math. You can, however, make what is effectively a 2-of-3 by using a three-branch SCRIPT: either 2-of-2 of you and seller, OR 2-of-2 of you and escrow, OR 2-of-2 of escrow and seller. Fortunately, Taproot adds a facility to embed a SCRIPT inside a public key, so you can have a 2-of-2 Taprooted address (between you and seller) with a SCRIPT branch that can instead be spent with 2-of-2 (you + escrow) OR 2-of-2 (seller + escrow), which implements the three-branched SCRIPT above. If neither of you are scammers (hopefully the common case) then you both sign using your keys and never have to contact the escrow
, since you are just using the escrow public key without coordinating with them (because n-of-n is trivial but k-of-n requires setup with communication rounds), so in the "best case" where both of you are honest traders, you also
get a privacy boost, in that the escrow never learns you have been trading on gewgaws, I mean ewww, gawgews are much better than gewgaws and therefore I now judge you for being a gewgaw enthusiast, you filthy gewgawer).
Taproot and Your Contracts, Part 2: Cryptographic Boogaloo
Now suppose you want to buy some data instead of things. For example, maybe you have some closed-source software in trial mode installed, and want to pay the developer for the full version. You want to pay for an activation code.
This can be done, today, by using an HTLC. The developer tells you the hash of the activation code. You pay to an HTLC, paying out to the developer if it reveals the preimage (the activation code), or refunding the money back to you after a pre-agreed timeout. If the developer claims the funds, it has to reveal the preimage, which is the activation code, and you can now activate your software. If the developer does not claim the funds by the timeout, you get refunded.
And you can do that, with HTLCs, today.
Of course, HTLCs do have problems:
- Privacy. Everyone scraping the Bitcoin blockchain can see any HTLCs, and preimages used to claim them.
- This can be mitigated by using offchain techniques so HTLCs are never published onchain in the happy case. Lightning would probably in practice be the easiest way to do this offchain. Of course, there are practical limits to what you can pay on Lightning. If you are buying something expensive, then Lightning might not be practical. For example, the "software" you are activating is really the firmware of a car, and what you are buying is not the software really but the car itself (with the activation of the car firmware being equivalent to getting the car keys).
- Even offchain techniques need an onchain escape hatch in case of unresponsiveness! This means that, if something bad happens during payment, the HTLC might end up being published onchain anyway, revealing the fact that some special contract occurred.
- And an HTLC that is claimed with a preimage onchain will also publicly reveal the preimage onchain. If that preimage is really the activation key of a software than it can now be pirated. If that preimage is really the activation key for your newly-bought cryptographic car --- well, not your keys, not your car!
- Trust requirement. You are trusting the developer that it gives you the hash of an actual valid activation key, without any way to validate that the activation key hidden by the hash is actually valid.
Fortunately, with Schnorr (which is enabled by Taproot), we can now use the Scriptless Script constuction by Andrew Poelstra
. This Scriptless Script allows a new construction, the PTLC or Pointlocked Timelocked Contract. Instead of hashes and preimages, just replace "hash" with "point" and "preimage" with "scalar".
Or as you might know them: "point" is really "public key" and "scalar" is really a "private key". What a PTLC does is that, given a particular public key, the pointlocked branch can be spent only if the spender reveals the private key of the given public key to you.
Another nice thing with PTLCs is that they are deniable
. What appears onchain is just a single 2-of-2 signature between you and the developemanufacturer. It's like a magic trick. This signature has no special watermarks, it's a perfectly normal signature (the pledge). However, from this signature, plus some datta given to you by the developemanufacturer (known as the adaptor signature
) you can derive the private key of a particular public key you both agree on (the turn). Anyone scraping the blockchain will just see signatures that look just like every other signature, and as long as nobody manages to hack you and get a copy of the adaptor signature or the private key, they cannot get the private key behind the public key (point) that the pointlocked branch needs (the prestige).
(Just to be clear, the public key you are getting the private key from, is distinct from the public key that the developemanufacturer will use for its funds. The activation key is different from the developer's onchain Bitcoin key, and it is the activation key whose private key you will be learning, not the developer's/manufacturer's onchain Bitcoin key).
- Privacy: PTLCs are private even if done onchain. Nobody else can learn what the private key behind the public key is, except you who knows the adaptor signature that when combined with the complete onchain signature lets you know what the private key of the activation key is. Somebody scraping the blockchain will not learn the same information even if all PTLCs are done onchain!
- Lightning is still useful for reducing onchain use, and will also get PTLCs soon after Taproot is activated, but even if something bad happens and a PTLC has to go onchain, it doesn't reveal anything!
- Trust issues can be proven more easily with a public-private keypair than with a hash-preimage pair.
- For example, the developer of the software you are buying could provide a signature signing a message saying "unlock access to the full version for 1 day". You can check if feeding this message and signature to the program will indeed unlock full-version access for 1 day. Then you can check if the signature is valid for the purported pubkey whose private key you will pay for. If so, you can now believe that getting the private key (by paying for it in a PTLC) would let you generate any number of "unlock access to the full version for 1 day" message+signatures, which is equivalent to getting full access to the software indefinitely.
- For the car, the manufacturer can show that signing a message "start the engine" and feeding the signature to the car's fimrware will indeed start the engine, and maybe even let you have a small test drive. You can then check if the signature is valid for the purported pubkey whose privkey you will pay for. If so, you can now believe that gaining knowledge of the privkey will let you start the car engine at any time you want.
- (pedantry: the signatures need to be unique else they could be replayed, this can be done with a challenge-response sequence for the car, where the car gathers entropy somehow (it's a car, it probably has a bunch of sensors nowadays so it can get entropy for free) and uses the gathered entropy to challenge you to sign a random number and only start if you are able to sign the random number; for the software, it could record previous signatures somewhere in the developer's cloud server and refuse to run if you try to replay a previously-seen signature.)
Taproot lets PTLCs exist onchain because they enable Schnorr, which is a requirement of PTLCs / Scriptless Script.
(technology-wise, take note that Scriptless Script works only for the "pointlocked" branch of the contract; you need normal Script, or a pre-signed nLockTimed transaction, for the "timelocked" branch. Since Taproot can embed a script, you can have the Taproot pubkey be a 2-of-2 to implement the Scriptless Script "pointlocked" branch, then have a hidden script that lets you recover the funds with an OP_CHECKLOCKTIMEVERIFY after the timeout if the seller does not claim the funds.)
Now if you were really
paying attention, you might have noticed this parenthetical:
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash...)
So wait, Taproot uses raw 32-byte public keys, and not public key hashes? Isn't that more quantum-vulnerable??
Well, in theory yes. In practice, they probably are not.
It's not that hashes can be broken by quantum computes --- they're still not. Instead, you have to look at how you spend from
a P2WPKH/P2PKH pay-to-public-key-hash.
When you spend from
a P2PKH / P2WPKH, you have to reveal the public key. Then Bitcoin hashes it and checks if this matches with the public-key-hash, and only then actually validates the signature for that public key.
So an unconfirmed transaction, floating in the mempools of nodes globally, will show, in plain sight for everyone to see, your public key.
(public keys should be public, that's why they're called public keys, LOL)
And if quantum computers are fast enough to be of concern, then they are probably fast enough that, in the several minutes to several hours from broadcast to confirmation, they have already cracked the public key that is openly broadcast with your transaction. The owner of the quantum computer can now replace your unconfirmed transaction with one that pays the funds to itself. Even if you did not opt-in RBF, miners are still incentivized to support RBF on RBF-disabled transactions.
So the extra hash is not as significant a protection against quantum computers as you might think. Instead, the extra hash-and-compare needed is just extra validation effort.
Further, if you have ever, in the past, spent from
the address, then there exists already a transaction indelibly stored on the blockchain, openly displaying the public key from which quantum computers can derive the private key. So those are still vulnerable to quantum computers.
For the most part, the cryptographers behind Taproot (and Bitcoin Core) are of the opinion that quantum computers capable of cracking Bitcoin pubkeys are unlikely to appear within a decade or two.
- Current quantum computers can barely crack prime factorization problem for primes of 5 bits.
- The 256-bit elliptic curve use by Bitcoin is, by my (possibly wrong) understanding, equivalent to 4096-bit primes, so you can see a pretty big gap between now (5 bit primes) and what is needed (4096 bit primes).
- A lot of financial non-Bitcoin systems use the equivalent of 3072-bit primes or less, and are probably easier targets to crack than the equivalent-to-4096-bit-primes Bitcoin.
- Quantum computers capable of cracking Bitcoin are still far off.
- Pay-to-public-key-hash is not as protective as you might think.
- We will probably see banks get cracked before Bitcoin, so the banking system is a useful canary-in-a-coal-mine to see whether we should panic about being quantum vulnerable.
For now, the homomorphic and linear properties of elliptic curve cryptography provide a lot of benefits --- particularly the linearity property is what enables Scriptless Script and simple multisignature (i.e. multisignatures that are just 1 signature onchain). So it might be a good idea to take advantage of them now while we are still fairly safe against quantum computers. It seems likely that quantum-safe signature schemes are nonlinear (thus losing these advantages).
- If you are a singlesig HODL-only Bitcoin user, Taproot will not affect you positively or negatively. Importantly: Taproot does no harm!
- If you use or intend to use multisig, Taproot will be a positive for you.
- If you transact onchain regularly using typical P2PKH/P2WPKH addresses, you get a minor reduction in feerates since multisig users will likely switch to Taproot to get smaller tx sizes, freeing up blockspace for yours.
- If you are using multiparticipant setups for special systems of trade, Taproot will be a positive for you.
- Remember: Lightning channels are multipartiicpiant setups for special systems of lightning-fast offchain trades!
I Wanna Be The Taprooter!
So, do you want to help activate Taproot? Here's what you
, mister sovereign Bitcoin HODLer, can do!
- If you have developer experience especially in C, C++, or related languages
- Review the Taproot code! There is one pull request in Bitcoin Core, and one in libsecp256k1. I deliberately am not putting links here, to avoid brigades of nontechnical but enthusiastic people leaving pointless reviews, but if you are qualified you know how to find them!
- But I am not a cryptographeBitcoin Core contributomathematician/someone as awesome as Pieter Wuille
- That's perfectly fine! The cryptographers have been over the code already and agree the math is right and the implementation is right. What is wanted is the dreary dreary dreary software engineering: are the comments comprehensive and understandable? no misspellings in the comments? variable names understandable? reasonable function naming convention? misleading coding style? off-by-one errors in loops? conditions not covered by tests? accidental mixups of variables with the same types? missing frees? read-before-init? better test coverage of suspicious-looking code? missing or mismatching header guards? portability issues? consistent coding style? you know, stuff any coder with a few years of experience in coding anything might be able to catch. With enough eyes all bugs are shallow!
- If you are running a mining pool/mining operation/exchange/custodial service/SPV server
- Be prepared to upgrade!
- One of the typical issues with upgrading software is that subtle incompatibilities with your current custom programs tend to arise, disrupting operations and potentially losing income due to downtime. If so, consider moving to the two-node setup suggested by gmax, which is in the last section of my previous post. With this, you have an up-to-date "public" node and a fixed-version "private" node, with the public node protecting the private node from any invalid chainsplits or invalid transactions. Moving to this setup from a typical one-node setup should be smooth and should not disrupt operations (too much).
- If you are running your own fullnode for fun or for your own wallet
- Be prepared to upgrade! The more nodes validating the new rules (even if you are a non-mining node!), the safer every softfork will be!
- If you are using an SPV wallet or custodial wallet/service (including hardware wallets using the software of the wallet provider)
- Contact your wallet provider / SPV server and ask for a statement on whether they support Taproot, and whether they are prepared to upgrade for Taproot! Make it known to them that Taproot is something you want!
But I Hate Taproot!!
- Raise your objections to Taproot now, or forever hold your peace! Maybe you can raise them here and some of the devs (probably nullc, he goes everywhere, even in rbtc!) might be able to see your objections! Or if your objections are very technical, head over to the appropriate pull request and object away!
- Maybe you simply misunderstand something, and we can clarify it here!
- Or maybe you do have a good objection, and we can make Taproot better by finding a solution for it!
Discussions About Taproot Activation
In the last days we have been experiencing a sharp rise in price, which is historically correlated with many people transacting over the Bitcoin network. Many people transacting over the Bitcoin network implies that the blockspace is in popular demand, meaning that when you send a transaction, it has to compete with other transactions for the inclusion in one of the blocks in the future. Miners are motivated by profits and transactions that pay more than other transactions are preferred when mining a new block. Although the network is working as intended (blockspace is a scarce good, subject to supply/demand dynamics, regulated purely by fees), people who are unfamiliar with it might feel worried that their transaction is “stuck” or otherwise somehow lost or “in limbo”. This post attempts to explain how the mempool works, how to optimize fees and that one does not need to worry about their funds.
TL;DR: Your funds are safe. Just be patient* and it'll be confirmed at some point. A transaction either will be confirmed or it never leaves your wallet, so there is nothing to worry about in regards to the safety of your coins.
You can see how the mempool "ebbs and flows", and lower fee tx's get confirmed in the "ebb" times (weekends, nights): https://jochen-hoenicke.de/queue/#0,30d
* if you are in hurry there are things like RBF (Replace By Fee)
and CPFC (Child Pays For Parent)
, which you can use to boost your transaction fees; you will need an advanced wallet like Bitcoin Core or Electrum for that though. Keep also in mind that this is not possible with any transaction (RBF requires opt in before sending, f.ex). If nothing else works and your transaction really needs a soon confirmation, you can try and contact a mining pool to ask them if they would include your transaction. Some mining pools even offer a web-interface for this: 1
Here’s how Andreas Antonopoulos describes it
In bitcoin there is no "in transit". Transactions are atomic meaning they either happen all at once or don't happen at all. There is no situation where they "leave" one wallet and are not simultaneously and instantaneously in the destination address. Either the transaction happened or it didn't. The only time you can't see the funds is if your wallet is hiding them because it is tracking a pending transaction and doesn't want you to try and spend funds that are already being spent in another transaction. It doesn't mean the money is in limbo, it's just your wallet waiting to see the outcome. If that is the case, you just wait. Eventually the transaction will either happen or will be deleted by the network.
tl;dr: your funds are safe
How is the speed of confirmations determined in bitcoin?
Open this site: https://jochen-hoenicke.de/queue/#0,2w
Here you see how many transactions are currently (and were historically) waiting to be confirmed, i.e how many transactions are currently competing with your transaction for blockspace (=confirmation).
You can see two important things: the differently coloured layers, each layer representing a different fee (higher layer = higher fees). You can point at a layer and see which fees (expressed in sat/byte) are represented in this layer. You can then deduct which layer your own transaction is currently at, and how far away from the top your position is (miners work through the mempool always from the top, simply because the tx's on top pay them more). You can estimate that each newly mined block removes roughly 1.xMB from the top (see the third graph which shows the mempool size in MB). On average, a new block is produced every ten minutes. But keep in mind that over time more transactions come into the mempool, so there can be periods where transactions are coming faster than transactions being “processed” by miners.
The second important observation is that the mempool "ebbs and flows", so even the lower paid transactions are periodically being confirmed at some point.
In short: what determines the speed of a confirmation is A) how high you set the fees (in sat/byte), B) how many other transactions with same or higher fees are currently competing with yours and C) how many transactions with higher paid fees will be broadcast after yours.
A) you can influence directly, B) you can observe in real time, but C) is difficult to predict. So it's always a little tricky to tell when the first confirmation happens if you set your fees low. But it's quite certain that at some point even the cheap transactions will come through.
So what happens if my transaction stays unconfirmed for days or even weeks?
Transactions are being broadcast by the full nodes on the network. Each node can adjust their settings for how long they keep unconfirmed transactions in their mempool. That’s why there is not a fixed amount of time after which a transaction is dropped from the mempool, but most nodes drop unconfirmed tx’s after two weeks [IS THIS CORRECT?]. This means that in the absolute worst case the unconfirmed transaction will simply disappear from the network, as if it never happened. Keep in mind that in those two weeks the coins never actually leave your wallet. It’s just that your wallet doesn’t show them as “available”, but you still have options like RBF and CPFP to get your transaction confirmed with higher fees, or to “cancel” your transaction by spending the same coins onto another address with a higher fee.
Helpful tools to estimate fees for future transactions:
Here are some resources that can help you estimate fees when sending a bitcoin transaction, so you don't end up overpaying (or underpaying) unnecessarily. Keep in mind that in order to take advantage of this, you need a proper bitcoin wallet which allows for custom fee setting. A selection of such wallets you can find here
The order here is roughly from advanced to easy.
Here you can see a visualization of how many unconfirmed transactions are currently on the network, as well as how many were there in the past. Each coloured layer represents a different fee amount. F.ex the deep blue (lowest layer) are the 1sat/byte transactions, slightly brighter level above are the 2sat/byte transactions and so on.
The most interesting graph is the third one, which shows you the size of the current mempool in MB and the amount of transactions with different fee levels, which would compete with your transaction if you were to send it right now. This should help you estimating how high you need to set the fee (in sat/byte) in order to have it confirmed "soon". But this also should help you to see that even the 1sat/byte transactions get confirmed very regularly, especially on weekends and in the night periods, and that the spikes in the mempool are always temporary. For that you can switch to higher timeframes in the upper right corner, f.ex here is a 30 days view: https://jochen-hoenicke.de/queue/#0,30d
. You clearly can see that the mempool is cyclical and you can set a very low fee if you are not in hurry.
This is also an overview of the current mempool status, although less visual than the previous one. It shows you some important stats, like the mempool size, some basic stats of the recent blocks (tx fees, size etc). Most importantly, it makes a projection of how large you need to set your fees in sat/byte if you want your transaction to be included in the next block, or within the next two/three/four blocks. You can see this projection in the left upper corner (the blocks coloured in brown).
This is a simple estimation tool. It shows you the likelihood (in %) of a particular fee size (in sat/byte) to be confirmed within a particular timeframe (measured in hours). It is very simple to use, but the disadvantage is that it shows you estimates only for the next 24 hours. You probably will overpay by this method if your transaction is less time sensitive than that.
This is a very simple bot that tweets out fees projections every hour or so. It tells you how you need to set the fees in order to be confirmed within 1hou6hours/12hours/1day/3days/1week. Very simple to use.
Hopefully one of these tools will help you save fees for your next bitcoin transaction. Or at least help you understand that even with a very low fee setting your transaction will be confirmed sooner or later. Furthermore, I hope it makes you understand how important it is to use a wallet that allows you to set your own fees.
Okay so I was testing out the transaction fees to send some bitcoin from my Trezor.... submitted by
I noticed, if I want to send like .08 or even .8 btc the transaction fees are high and increase according to a higher btc amount. For example .08btc = $3.40 tx fee or .8btc = $40 tx fee. (these are just hypothetical numbers )
Now if i wanted to send any amount over 1btc, the transaction fee for high speed on Trezor drop significantly to around just $1.50, in effect, just way LOWER. I also get a warning sign from Trezor saying be careful that I am sending a very large amount of bitcoin.
Is this some kind of glitch? Why would transaction fees decrease so drastically if you send an amount greater than 1btc?
wouldn't the fee increase as it normally does as you increase btc amount? Is there some kind of special thing that all 1btc< amounts get pegged to a lower transaction fee?
So confused, please help. Don't want to send large amount of bitcoin and sit unconfirmed because i put in too small fee. thank you
Every bitcoin transaction that's sent flows into what's called the mempool (short for memory pool) before it can be confirmed by miners. When there's a dramatic spike in transaction activity, the mempool can become congested because so many transactions are waiting to be included in the next block. Bitcoin users across the network may notice their transactions sit as unconfirmed or pending for ... Why Bitcoin Transactions Remain Unconfirmed. An unconfirmed bitcoin transaction occurs when a given transaction fails to receive a confirmation on the blockchain within 24 hours. All bitcoin transactions must be confirmed by miners. They need a minimum of three confirmations to be considered fully confirmed. There are two main reasons your bitcoin transaction may end up remaining unconfirmed ... Why is it taking so long for my transaction to confirm? If you have sent a transaction. without (or with an exceptionally small) transaction fee . expect it to be ignored for an unknown amount of time until a miner decides to process it and solves the block; this could be several days to several weeks, possibly never. Your wallet and any Bitcoin node will show it as unconfirmed, your ... Why Is My Bitcoin Transaction Unconfirmed . Mar 27, 2018 DTN Staff. twitter. pinterest. google plus. facebook. Bitcoin Transaction Unconfirmed ... Why is my BTC transaction unconfirmed? There are so many things that can actually keep your Bitcoin transaction for more than 24 hours even, but these ones below are the most popularly known reasons: The transaction operation is still in progress; The transaction fee you chose was too low, or not included entirely; The stalled transaction remained unconfirmed for more than 24 hours. How to ...
Get your blockchain pending transactions confirmed fast What to Do if Your Bitcoin Transaction Gets "Stuck"...Unconfirmed. Accelerate your transaction using the methods in this video. *****... What is Blockchain Unconfirmed Transactions? How To Confirm Those Transactions? Watch Cryptocurrency Playlist for all mining related videos : - https://www.y... Today Your Blockchain Transaction Pending, Unconfirmed Why? You Must know why Your Blockchain Txn is Not Verified, Pending , know Reason Behind it. This video is unavailable. Watch Queue Queue